Everything About Garage Door Openers

If you own a Wayne Dalton garage door opener and it isn’t working because a part failed, then you might find this article useful, if you want to replace it. The Wayne Dalton garage door opener parts that most people search for, are: Gear Sets, Safety Beams and Circuit Boards.

Probably the most important replacement part is the Wayne Dalton safety sensor (3967), because preventing injuries is the most important thing. It costs somewhere around $35 and you will also get the wires you need. However, you will have to buy the brackets separately. After installing it, make sure to test it, it is of high importance that it works properly.

If you have to replace the motor control board it can get pretty expensive. A universal control board (306132) costs approximately $65. It can be used for Quantum, ClassicDrive and ProDrive. The frequency of the openers must be 303 MHz or 312 MHz. It can’t be used for DoorMaster or idrive openers.

The Wayne Dalton Drive Gear and Sprocket (260525) is compatible with all classic and Quantum models, which have a chain drive. The kit offers you the sprocket set and the drive gear. It costs somewhere around $25. The warranty is for one year.

The Wayne Dalton 2 Cog Drive Sprocket (325022) can be used for the following ProDrive models: 3220C, 3221C, 3222C, 3224C Classic Drive 3018, 3018DL. It will cost around $10.

The Wayne Dalton Belt Drive Coupling (325687) is compatible with 3522, 3522DLX classic drive models and with 3220B, 3322B, 3324B ProDrive models. It will only cost approximately $10.

The Wayne Dalton Pro Drive or Classic Main Gear (325020) is designed to be used for chain and belt drive garage door openers using a main drive gear which accepts 2 cog drive sprockets. Compatible Classic opener models are: 3108, 3018DLX, 3522, 3522DLX. Compatible ProDrive models are: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B. The price for this part is somewhere around $20 and the warranty si for one year.

These are the most important parts you might have to replace. You can get them quite easily and they all are pretty cheap except the motor control board. If you need to replace it, then I would recommend buying another garage door opener, which is more efficient and much safer.