Everything About Garage Door Openers

The Stanley Works company has existed for about 163 years. Since then, they manufactured hardware products. Over the years it has become a company which is known for the high quality of products. Everything that is manufactured at Stanley Works company was designed for home improvement. A garage door opener is also a piece of gear which will help you improve your home. You can also buy all the tools you need from Stanley Works to install the garage door opener. If you need Stanley garage door opener parts, this article will let you know what you can find.

The first part I’m going to talk about is the Stanley garage door opener infrared safety system 49522. It costs somewhere around $40 and can be used for openers which are from 1993 to more recent models which are equipped with safety sensors. It comes with sensor, wires and connectors. Safety sensor mounting brackets are also easy to find and only cost $10. They can be used for the 49522 model. The chain drive assembly kits cost about $40 and are compatible with Stanley garage door openers that were manufactured in 1982 to the current ones. The kit includes carriage assembly, inner slide and master link assembly. Not that this kit is only compatible with round tube style rail.

A Stanley chain drive carriage can be bought for approximately $35. It can be used for Stanley garage door openers models from 1982 and for all other models including the current ones. The chain drive carriage inner slide costs somewhere around $10 and can also be used for models since 1982 up to the current models. A screw drive carriage assembly kit can be bought for about $35 and ca be used on models from 1993 to current. The gear case cover assembly costs approximately $40 and can be used for the following models: RT401, RT405, ST105, ST205, AT2000, AT2010, AT2020, CT405, CT505, D2001, FM200, ST305, ST405, ST505, ST605, SW115, SW215, SW315, SW515, SW615, TT301.B09, WH355, WH455, WH655, PC405, PC505, UT105, UT205, UT305, UT315, UT405, UT505, UT605.

The gear case cover is compatible with all models that were manufactured before 1993. It won’t cost more than $40. Another part is the drive gear, which will cost you around $20. A Stanley garage door opener worm cost $5 and can be used only for quiet glide machines. The front idler assembly costs somewhere around $32 and can be used only for chain or cable door openers. The chain and cable assembly doesn’t cost more than $40. You can also get a cable repair kit for only $18, which can be used for chain and cable models.

The price for a chain drive tooth sprocket is only $10 and can be found with 8 or 10 teeth. The limit switch actuator costs somewhere around $20 and is available for the following models:GT200, GT300, GT400, MT130, TT100, TT200, TT300, V1000, V2000, ST100, ST200, ST300, ST400 and ST500. You can also find micro capacitors starting at $20 with a micro F range from 43 to 77.

A dual light socket cost about $10. The screw drive coupling kit and the limit switch kit are sold for approximately $20 and can be used for models manufactured in 1993 up to current models. Other parts that you might find useful are: Rear Tube Support, Chain Guard, Header Bracket, Door Bracket, Rear Tube Support, Straight Arm, Garage Door Opener Curved, Magnet Assembly and Voltage Surge Protector.

The most important part, which makes the garage door opener function, is the circuit board. It is available for almost any old model and costs somewhere around $50. These are the most important parts that you might find useful for your garage door opener.

If you own a Wayne Dalton garage door opener and it isn’t working because a part failed, then you might find this article useful, if you want to replace it. The Wayne Dalton garage door opener parts that most people search for, are: Gear Sets, Safety Beams and Circuit Boards.

Probably the most important replacement part is the Wayne Dalton safety sensor (3967), because preventing injuries is the most important thing. It costs somewhere around $35 and you will also get the wires you need. However, you will have to buy the brackets separately. After installing it, make sure to test it, it is of high importance that it works properly.

If you have to replace the motor control board it can get pretty expensive. A universal control board (306132) costs approximately $65. It can be used for Quantum, ClassicDrive and ProDrive. The frequency of the openers must be 303 MHz or 312 MHz. It can’t be used for DoorMaster or idrive openers.

The Wayne Dalton Drive Gear and Sprocket (260525) is compatible with all classic and Quantum models, which have a chain drive. The kit offers you the sprocket set and the drive gear. It costs somewhere around $25. The warranty is for one year.

The Wayne Dalton 2 Cog Drive Sprocket (325022) can be used for the following ProDrive models: 3220C, 3221C, 3222C, 3224C Classic Drive 3018, 3018DL. It will cost around $10.

The Wayne Dalton Belt Drive Coupling (325687) is compatible with 3522, 3522DLX classic drive models and with 3220B, 3322B, 3324B ProDrive models. It will only cost approximately $10.

The Wayne Dalton Pro Drive or Classic Main Gear (325020) is designed to be used for chain and belt drive garage door openers using a main drive gear which accepts 2 cog drive sprockets. Compatible Classic opener models are: 3108, 3018DLX, 3522, 3522DLX. Compatible ProDrive models are: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B. The price for this part is somewhere around $20 and the warranty si for one year.

These are the most important parts you might have to replace. You can get them quite easily and they all are pretty cheap except the motor control board. If you need to replace it, then I would recommend buying another garage door opener, which is more efficient and much safer.

Everyone who uses the garage a lot, especially to drive the car in and out, will love to have a garage door opener. But what if a part from the garage door opener fails? You don’t have to worry. As far as finding and replacing Liftmaster garage door opener parts goes, it can be very easy. The best thing is that most of the parts aren’t that expensive. The biggest issue though is to find out what the problem is.

If the safety beam is broken you can either just buy a safety beam or you can buy a safety beam kit. Both cost somewhere around $35. This safety beam is compatible with all fail safe units from Liftmaster. You also get wires and connectors.

The circuit boards available for the Liftmaster openers are for non-security and security models. These circuit boards can also be used for other models, not only Liftmaster. The price for a circuit board isn’t higher than $80.

You can also get a Liftmaster garage door opener gear set, which is compatible with all Liftmaster models between 1984 and 2002. The kit contains gear, spiral wheel, Lubriplate grease and everything you need for the installation process. The cost of this kit is approximately $25.

The carriage of the opener can also be replaced. The cost will depend if you have a chain drive, a screw drive or belt drive garage door opener. The price starts from $17 and can go up to $25.

Other parts available for Liftmaster are: garage door monitor, carriage racks, multi-function control panel, vibration isolation kit, Chamberlain sprocket coupler, safety sensor bracket kit, power surge suppressor kit, power surge kit, multi function control, infrared control console, sears door bracket, assembly for chain and cable, multi function control panel, light appliance control, cable kit, universal plug-in 24V transformer, drive belt, safety beams wires and connectors, lens cover, RPM sensor, light socket, universal key switch, key release, surge protector 990LM, pulley bracket, header bracket, idler pulley and laser parking.

Everything you need is available you just have to order it. The installation process also is very easy and you can do it yourself. Still, you should carefully read the instruction manual.

If one of your Genie garage door opener parts doesn’t work properly anymore or is badly damaged you can easily find a replacement part. The parts which can be replaced are: transmitters, receivers, circuit boards, capacitors, carriages, safety beams, accessories and other parts.

Genie GIT90-1, Genie GPT-90-1, Genie GIT90-2, Genie GT912, Genie GIT90-3, Genie MAT90, Genie GPT90-3, Genie GMIC90-2  are all transmitters, which cost approximately between $15 and $25. Some of them are supplied with Intellicode, but not all of them.

The receiver will be a little bit more expensive to replace, it can cost up to $100. The most common models are: Intellicode Receiver Model GIR390 , Receiver Model GR390-12, Receiver Board - Part #25648R (12-switch)  and conversion kits. The conversion kits can be used if you want to change to the Intellicode technology.

The circuit boards are also quite expensive, they cost somewhere around $50. The most common circuit boards you will find are: Sequencer Board model 31184R (20386R) for Intellicode Systems 1997-UP, Genie Sequencer Board #31181R, Genie Sequencer Board #27504R, Genie Sequencer Board #20384R, Genie Sequencer Board #24350S, Genie Sequencer Board #30611R, Genie Sequencer Board #30901S, Genie DC Motor Drive Board #34463R.S, Genie DC Controller Board #34019R.S.

The Capacitor won’t cost you much, it is approximately $18 and almost any Genie Capacitor is good for your garage door opener. The price of the carriage won’t be higher than $30. Another thing what is good to know that a Genie chain drive carriage for example is good for any Genie chain drive garage door opener. This applies for the other types of openers too.

Safety beams cost around $40. You will also receive everything you need to install them. The important thing is to test them after you installed them. Without a safety someone could get badly injured or in the worst case killed.

You can also find all the parts you need for Genie chain drive, screw drive and belt drive. In conclusion, replacing a part won’t cost you much and it also is pretty easy. You can do it yourself. However, it is much better too to do a proper maintenance and then you might have the Genie garage door opener for a long long time. The most important thing is that you always have a working safety beam, because I’m sure that you don’t want anyone to get injured.